Licensed & Insured, in New Haven and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in New Haven
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (475) 234-4843 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in New Haven and surrounding areas · On-site visits included · Free estimate within 24h
New Haven Metal Roofing is a team of local certified professionals based in New Haven. We respond quickly in New Haven and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (475) 234-4843⭐⭐⭐⭐⭐ 4.9/5 · 146 verified Google reviews
“Needed the roof done on our hay barn out on the edge of town and these guys knocked it out in about three days with a four-man crew. I was worried a metal roof on an ag building would look too industrial, but they matched the color to the old barn and it looks sharp. They even cleaned up every last screw and scrap piece before they left.”
Commercial & Agricultural Metal Roofing
“We had the copper awning over our side porch completely redone and honestly it looks better than the original. The crew was careful around my wife's flower beds and the seams are straight as an arrow. Not the cheapest quote we got, but you get what you pay for with copper work.”
Copper & Specialty Metal Roofing
“Our old farmhouse barn roof was rusted through in spots and I figured we'd have to tear the whole thing off. They explained the retrofit option, walked me through it, and had the new panels on over the existing shingles in two days. Saved us a pile of money and the barn's dry for the first time in years.”
Metal Roof Replacement
“Got a standing seam roof put on our house and I'm genuinely impressed with how quiet it is during rain, I expected way more noise. The foreman kept me updated every day and the cleanup was spotless. Only reason it's not five stars is they pushed the start date back a week, but the work itself was top notch.”
Standing Seam Metal Roofing
“Had a leak that only showed up around the chimney during heavy storms and two other roofers couldn't figure it out. These guys found the flashing issue in about twenty minutes and fixed it the same visit. Three storms later and not a drop inside. Wish I'd called them first.”
Chimney & Skylight Repair
“Brand new metal roof on our place and the difference is night and day. The crew of five were polite, on time every morning, and the job was done in four days flat. They even swept the driveway with a magnet for stray screws, my tires thank them.”
Metal Roof Installation
“We wanted to keep the Tudor look of our house so we went with metal shingles instead of panels and I'm so glad we did. The color match to the old roof is nearly perfect and you'd never know it's metal from the street. Install took a bit longer than quoted but the finished product was worth the wait.”
Metal Shingle Roofing
“Decided to retrofit over our old shingles instead of a full tear-off and it was the best call we made. They checked the decking first, added the underlayment, and had the new panels down in three days. House is cooler this summer and the attic doesn't get that oven feeling anymore.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in New Haven · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, and panels on straightforward pitches; deck repair and access add cost |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and fabricated trim; roof complexity and panel gauge are the main cost drivers |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes underlayment and trim; historic profiles and steep pitches raise the per-square rate |
| Over-shingle retrofit | Starting at $7/sq ft | Where code allows a single existing layer; limited to roofs with sound decking and simple geometry |
| Complex or large-scale job | On estimate | Multi-valley roofs, chimney rebuilds, and tight urban access need an on-site look before pricing |
| Estimate | Free | On-site measurement and written scope within 24 hours at (475) 234-4843, no obligation |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, simple gable | Starting at $10/sq ft | 26-gauge panels, concealed fasteners, standard trim on a sound deck with straightforward access. |
| Mechanically seamed 24-gauge | Starting at $14/sq ft | Double-locked seam for high-wind exposure, priced higher for gauge, seaming labor and clip spacing. |
| Standing seam over existing shingles | Starting at $12/sq ft | Retrofit with sub-purlins over one shingle layer, avoids tear-off and dumpster costs. |
| Complex roof with valleys and dormers | On estimate | Multiple valleys, dormers, mansard sections and chimney flashing need an on-site measure before pricing. |
| Travel | Included | in New Haven and surrounding towns, no separate call-out or mileage fee added to the quote. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, written scope, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and new ribbed panels with fasteners. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, raised seams, and full flashing; pitch and panel gauge move the price. |
| Stone-coated steel or metal shingle | Starting at $12/sq ft | Includes tear-off, underlayment, and stamped panels; historic district details add labor. |
| Complex or large-scale job | On estimate | Steep pitches, multiple tear-off layers, decking rot, or tight access need an on-site look first. |
| Travel | Included | In New Haven and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one shingle layer | Starting at $7/sq ft | Includes slip sheet, panel, fasteners and standard flashing; roof pitch and deck condition move the price. |
| Retrofit over two shingle layers | Starting at $8.50/sq ft | Adds heavier separation and longer fasteners; layer count and code limits drive the increase. |
| Partial tear-off plus retrofit | On estimate | Needed when the roof is at the code layer limit or has soft decking; requires an on-site look first. |
| Travel | Included | In New Haven and surrounding towns, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (seam, fastener, small flashing) | Starting at $450 | Includes roof inspection, resealing open seams, replacing backed-out screws, and minor flashing touch-ups with matching materials. |
| Panel replacement (single panel) | Starting at $750 | Covers removal and replacement of one damaged panel, matching profile and gauge, plus seam and fastener re-set. |
| Chimney or skylight flashing rebuild | Starting at $950 | Includes full flashing tear-out and rebuild with proper metal, sealant, and water test where accessible. |
| Storm or limb damage repair | On estimate | Needs an on-site look to assess panel count, decking condition, and access before a firm number is given. |
| Travel | Included | in New Haven and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Diagnosis, standard repair such as boot or fastener replacement, and water test included. |
| Flashing or penetration repair | Starting at $650 | Rebuild chimney, skylight, or sidewall flashing; price moves with height and access. |
| Multi-point or widespread repair | On estimate | Multiple leaks or systemic fastener failure need an on-site look before pricing. |
| Emergency tarping | Starting at $350 | Temporary weatherproofing after storm damage, credited toward permanent repair if booked. |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small repair zone) | Starting at $750 | Includes new screws, UV-resistant washers, and a water test; price moves with roof pitch and access. |
| Full roof re-screw (typical home) | Starting at $1,200 | Replaces every fastener and washer across the roof; square footage and number of penetrations drive the price. |
| Full roof re-screw (large or steep roof) | Starting at $2,800 | Covers large colonials and steep shoreline cottages; limited ladder access and panel re-seating add labor. |
| Oversized screw retrofit and corrosion treatment | On estimate | Needs an on-site look to count stripped holes and assess purlin condition before pricing. |
| Travel | Included | In New Haven and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, small outbuilding | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and basic flashings on a sound deck; pitch and height move the price. |
| R-panel roof, garage or workshop | Starting at $7.00/sq ft | Heavier gauge and longer spans included; sheathing repairs and added purlins raise the figure. |
| Retrofit over existing shingles | Starting at $6.50/sq ft | Strapping and panels over a sound roof where code allows; layer count and deck condition decide feasibility. |
| Tear-off and re-deck with panels | On estimate | Old cover removal, sheathing replacement, and new panels need an on-site look before pricing. |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural-profile metal shingle install | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, new drip edge and standard flashing on a simple gable roof. |
| Slate-look or shake-look metal shingle install | Starting at $13/sq ft | Premium interlocking panels with heavier trim work, best for Victorian and Tudor homes with complex rooflines. |
| Metal shingle over existing shingles (retrofit) | Starting at $7/sq ft | Skips tear-off where code allows and the existing layers are within the permitted limit. |
| Deck repair or sheathing replacement | On estimate | Priced after tear-off reveals the extent of rot, soft spots or failed board sheathing. |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement, standard pitch | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, ice-and-water shield at eaves and new drip edge. |
| Steep or complex roof (dormers, valleys, turrets) | Starting at $12/sq ft | Adds labor for staging, cutting and flashing detail on Victorian and Tudor roofs with multiple planes. |
| Decking repair or replacement | On estimate | Soft or skip sheathing must be corrected before panels go down, so we price it after opening the roof. |
| Low-slope stone-coated panel system | On estimate | Sealed laps and reinforced valleys on flat and low-pitch triple-decker roofs need an on-site look. |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent (porch, bay, dormer) | Starting at $20/sq ft | Includes shop-fabricated copper pans and soldered seams; radius and access move the price. |
| Zinc or aluminum accent work | Starting at $16/sq ft | Lighter specialty metal for trim and porches; metal choice and detail count drive cost. |
| Full architectural copper roof | On estimate | Needs an on-site look: deck condition, roof area and fabrication volume set the number. |
| Custom flashing and repair | On estimate | Priced by detail once we see the penetration, seam failure and access. |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic acrylic coating on a simple panel roof | Starting at $2.50/sq ft | Includes cleaning, spot priming, and one full coat on an accessible low-pitch roof |
| Silicone or polyurethane system | Starting at $3.50/sq ft | Higher-solids coating for salt-air exposure or low-slope ponding, priced by roof square footage |
| Rust treatment and fastener replacement add-on | Starting at $450 | Rust converter, spot primer, and replacement screws priced by count and access difficulty |
| Complex or steep roof with dormers | On estimate | Multiple planes, steep pitch, and historic trim need an on-site look before pricing |
| Travel | Included | In New Haven and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (475) 234-4843, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney step and counterflashing repair | Starting at $600 | Covers resetting or replacing step flashing and cutting new counterflashing into the masonry. |
| Skylight curb flashing repair | Starting at $750 | Reseals or rebuilds the curb flashing, with price rising for low-pitch roofs and larger units. |
| Chimney cricket fabrication and rebuild | On estimate | Wide chimneys and low-pitch roofs need a custom bent saddle and an on-site look before pricing. |
| Valley, dormer and sidewall flashing | Starting at $650 | Open valleys and dormer cheeks priced by linear feet and access to the roof plane. |
| Travel | Included | in New Haven and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry or porch roof | Starting at $1,200 | Pad or bar guards over one door or stoop, including layout, fasteners, and cleanup. |
| Driveway and walkway protection | Starting at $1,800 | Two or more protected zones on a single-family roof, with guard count set by run length. |
| Standing seam clamp-on layout | Starting at $2,400 | Clamp-on guards that leave the seam unpierced, priced higher per piece but no panel penetration. |
| Large or multi-zone roof | On estimate | Long runs, steep pitch, or several eave lines need an on-site measure before we quote. |
| Travel | Included | in New Haven and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walkthrough with photos, plus a written repair versus replacement assessment |
| Minor repair (fasteners, seams, flashing) | Starting at $350 | Includes resealing, screw replacement and small flashing repairs; access and roof pitch move the price |
| Panel or section replacement | Starting at $900 | Covers removal and replacement of damaged panels; panel profile availability and color match affect cost |
| Emergency tarping and water control | Starting at $450 | Temporary protection to stop active leaks; urgency and roof access are the main cost factors |
| Insurance documentation packet | Included with repair | Photo set, damage map and written scope prepared for your claim; coverage decisions remain with your insurer |
| Estimate | Free | Response within 24 hours at (475) 234-4843, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Walk-over inspection with photo report, priced by roof size, pitch and panel type |
| Leak-tracing inspection | Starting at $350 | Attic and interior check plus moisture readings, priced up for complex flashing and multi-level roofs |
| Insurance or pre-sale report | Starting at $450 | Written condition report with photos and repair priorities for buyers, sellers and insurers |
| Complex or large-scale roof | On estimate | Steep, multi-level or historic roofs need an on-site look before we quote the inspection |
| Travel | Included | in New Haven and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Fabricated on site with hidden hangers; run length and access move the price. |
| Heavy-gauge steel gutter | Starting at $14/linear ft | Thicker wall and stronger hangers for long runs and heavy snow load. |
| Leaf guards and strainers | Starting at $6/linear ft | Screens or hoods sized for maples and oaks, with clean-out access at corners. |
| Oversized downspouts and discharge routing | Starting at $12/linear ft | Larger outlets and discharge paths that carry snowmelt away from foundations. |
| Complex or large-scale job | On estimate | Steep roofs, tight side yards or full perimeter replacement need an on-site look. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk of deck, purlins, fasteners and flashing, with photos and a written scope. |
| Re-fastening and screw replacement | Starting at $1,200 | Failed fasteners and washers replaced along affected purlin lines, with closure strips as needed. |
| Partial re-panel or repair | Starting at $2,500 | Damaged panels swapped and ridge or eave flashing re-set; price moves with roof height and access. |
| Full metal roof replacement | On estimate | Priced per square after panel profile, gauge, purlin condition and lift access are confirmed on site. |
| Travel | Included | In New Haven and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 234-4843, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in New Haven want straight answers, not a sales pitch. New Haven Metal Roofing is your local source for metal roof installation, replacement, re-roofing, and repair. We work on the steep pitches, tight tree cover, and exposed ridges that define roofs across New Haven, West Haven, East Haven, North Haven, and Orange. From the triple-deckers of Fair Haven to the Colonials of East Rock, we match the right metal system to the home and the weather it faces.
Our network of licensed, insured local contractors understands the region's aging screw-down roof stock and the freeze-thaw cycles that test every fastener and seam. Whether you need a full Metal Roof Installation or a targeted repair, we start with an honest assessment. Call (475) 234-4843 to schedule a free estimate and learn what your roof actually needs.
Metal roofs are durable, but they are not maintenance-free. The most common failure we see on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water finds a path. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a nor'easter and punctures from fallen limbs are also frequent calls. Ignoring these issues lets water track along purlins and decking far from the entry point, leading to rotted sheathing and damaged insulation.
The honest call between repair and replacement depends on the roof's age, panel condition, and how widespread the failures are. Often, a full Screw Replacement & Re-Fastening restores a watertight roof for a fraction of replacement cost. When leaks are active, our Metal Roof Leak Repair team traces the source and fixes it properly rather than patching over the symptom. Call (475) 234-4843 for a prompt inspection and a clear recommendation.
We never pressure you into a new roof if a repair will do. Our free estimate includes a written scope and photos so you can decide with confidence. If replacement is the right answer, we will tell you that too, and explain why.
We install the full range of metal roofing systems and match each one to the home, the pitch, and the budget. Standing Seam Metal Roofing uses concealed clips and offers premium performance with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic homes.
Standing seam costs more upfront but has no exposed fasteners to service. Screw-down costs less and needs its fasteners checked over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option. When it is not, tear-off is the honest choice.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Your price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Typical ranges vary widely, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, visit our pricing page, then request a free estimate or free roof inspection. We will give you a written scope with no pressure and no surprises.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the New Haven building or planning department before starting your project.
We are happy to answer questions and walk you through the process. Contact us to schedule your inspection and get clear, honest guidance for your New Haven home.
Ready to get started? New Haven Metal Roofing serves in New Haven and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in New Haven · Response within 24h · No commitment · ☎ (475) 234-4843
Your Free Quote Request